Mudanças entre as edições de "Ways to Change a Toilet: Do It Yourself Easy Steps Plumbing"

De GEATI - Grupo de Estudos Avançados em TI
Ir para: navegação, pesquisa
m (Ways to Change a Toilet: Do It Yourself Easy Steps Plumbing)
m (Ways to Change a Toilet: Do It Yourself Easy Steps Plumbing)
Linha 1: Linha 1:
Remove the existing toilet. Before removing anything, make sure the supply of water to the toilet is turned off at the stop valve.
+
[http://demo.iqjz.com/4127/comment/html/?629270.html Faulty Shower Faucet? A Guide for Troubleshooting and Fixing] Troubles of toilet obstructing are common with older toilets. Allow for the oil to rest before attempting to unthread them.
  
Empty the toilet by flushing it while holding the toilet handle for some time to ensure it flushes longer than typical. Utilize a sponge to clear any water left in the storage tank.
+
You can cut them off using a hacksaw if the nuts are still stuck. Remove the old storage tank and also discard it.
 
+
Next, begin unthreading the toilet coupling nut. This is the nut attaching the toilet tank with its water supply. Use a channel-type of pliers to unthread it. In case you own a wet vacuum cleaner, utilize it to dry out any type of water left in the bowl and tank.
+
 
+
Step 2:
+
 
+
Use a pair of pliers or box wrench to grip each toilet storage tank screw. You can maintain each bolt utilizing a slotted screwdriver while removing them.
+
 
+
In case the nuts really feel stuck, apply some penetrating oil on them. Permit the oil to sit prior to attempting to unthread them.
+
 
+
You can cut them off using a hacksaw if the nuts are still stuck. Remove the old tank as well as discard it.
+
  
 
Step 3:
 
Step 3:
  
Next, unthread the nuts holding the toilet bowl on the flooring. Beginning with prying off any type of screw covers using a screwdriver.
+
Next, unthread the nuts holding the toilet bowl on the floor. Begin with prying off any type of bolt covers using a screwdriver.
  
Use a channel-type of pliers or securing pliers or socket wrench to loosen up each nut on the toilet container bolts. Use some penetrating oil on them as well as allow them to sit before trying to unthread them if the nuts feel stuck.
+
Utilize a channel-type of pliers or locking pliers or socket wrench to loosen up each nut on the toilet container bolts. Apply some penetrating oil on them and allow them to rest prior to trying to unthread them if the nuts really feel stuck.
  
Cut them off utilizing a hacksaw if you're still unable to unthread them. Then turn the bowl and remove it.
+
Cut them off using a hacksaw if you're still not able to unthread them. Turn the bowl as well as detach it.
  
 
Bonus Pointer:.
 
Bonus Pointer:.
  
It can be rather disgusting to remove old wax rings. It's really one of the most terrible work in plumbing. In this situation, you'll need to use a putty knife to remove the wax ring.
+
It can be quite unpleasant to remove old wax rings. It's actually one of one of the most unpleasant work in plumbing. In this case, you'll require to use a putty blade to remove the wax ring.
  
Put the putty blade below the wax ring flange and scuff it. The ring will certainly remove in pieces. Remember to dispose of every single portion as quickly as it comes off given that they conveniently stick on anything.
+
Place the putty blade below the wax ring flange and also scrape it. In many cases, the ring will separate in portions. Keep in mind to discard every single chunk as quickly as it comes off because they quickly stick on anything.
  
In case some deposit is left, scrub them off using a mineral spirit. When the area is clean, take a cloth and also stuff it right into the drain to obstruct any sewage system gas. It's actually the wax ring that makes a significant distinction between smelly water closets and nice ones.
+
In case some deposit is left, scrub them off utilizing a mineral spirit. When the area is clean, take a rag as well as stuff it into the drainpipe to obstruct any type of sewage system gas. It's in fact the wax ring that makes a significant distinction between foul-smelling water closets and also appealing ones.
  
 
Step 4:
 
Step 4:
  
You can at this time eliminate the cloth by removing it from the opening of the drainpipe as well as inserting new toilet bolts (made from brass) into the flange ports at 9 as well as 3 o'clock.
+
You can now get rid of the rag by removing it from the opening of the drain and also placing brand-new toilet bolts (made from brass) right into the flange ports at 9 and also 3 o'clock.
  
Revolve each screw at a 1/4 turn to ensure the heads will not be withdrawn. Next, placed the washers or plastic protectors on the brand-new screws.
+
Turn each screw at a 1/4 turn to make certain the heads won't be taken out. Next, put the washers or plastic keepers on the new bolts.
  
After that place the nuts and also secure them onto the flange. Next, unpack the new wax ring. Position it to ring on the flange.
+
Put the nuts as well as secure them onto the flange. Next, unpack the brand-new wax ring. Then position it to ring on the flange.
  
 
Step 5:
 
Step 5:
  
Lower your new toilet over the ring such that the toilet bolts enter the bolt openings on the stool. Next, press the toilet downwards to seat firmly in the ring.
+
Lower your new toilet over the ring such that the toilet screws go into the bolt openings on the stool. This might be tricky to do, so be patient when doing it or have help. Next, press the toilet downwards to seat firmly in the ring. Keep in mind to inspect whether it's level.
 +
 
 +
In case it's uneven, utilize some pennies under it to level it. Thread the washers and also toilet nuts on the toilet floor screws. Tighten up the nuts a little bit one at a time while rotating from one nut to the other. Avoid over-tightening the nuts.
 +
 
 +
Utilize a hacksaw to cut off the exposed screw part above the nuts. After that cap the bolts. Next, apply tile caulk throughout the toilet base while leaving the back area open to enable water to leave. This will enable you to identify a leak.
 +
 
 +
Step 6:
  
Thread the washers and also toilet nuts on the toilet flooring screws. Tighten up the nuts a little bit one by one while alternating from one nut to the some other.
+
You can now connect the water container. Some toilet storage tanks usually come with a preinstalled fill and flush valves.

Edição das 10h23min de 30 de janeiro de 2022

Faulty Shower Faucet? A Guide for Troubleshooting and Fixing Troubles of toilet obstructing are common with older toilets. Allow for the oil to rest before attempting to unthread them.

You can cut them off using a hacksaw if the nuts are still stuck. Remove the old storage tank and also discard it.

Step 3:

Next, unthread the nuts holding the toilet bowl on the floor. Begin with prying off any type of bolt covers using a screwdriver.

Utilize a channel-type of pliers or locking pliers or socket wrench to loosen up each nut on the toilet container bolts. Apply some penetrating oil on them and allow them to rest prior to trying to unthread them if the nuts really feel stuck.

Cut them off using a hacksaw if you're still not able to unthread them. Turn the bowl as well as detach it.

Bonus Pointer:.

It can be quite unpleasant to remove old wax rings. It's actually one of one of the most unpleasant work in plumbing. In this case, you'll require to use a putty blade to remove the wax ring.

Place the putty blade below the wax ring flange and also scrape it. In many cases, the ring will separate in portions. Keep in mind to discard every single chunk as quickly as it comes off because they quickly stick on anything.

In case some deposit is left, scrub them off utilizing a mineral spirit. When the area is clean, take a rag as well as stuff it into the drainpipe to obstruct any type of sewage system gas. It's in fact the wax ring that makes a significant distinction between foul-smelling water closets and also appealing ones.

Step 4:

You can now get rid of the rag by removing it from the opening of the drain and also placing brand-new toilet bolts (made from brass) right into the flange ports at 9 and also 3 o'clock.

Turn each screw at a 1/4 turn to make certain the heads won't be taken out. Next, put the washers or plastic keepers on the new bolts.

Put the nuts as well as secure them onto the flange. Next, unpack the brand-new wax ring. Then position it to ring on the flange.

Step 5:

Lower your new toilet over the ring such that the toilet screws go into the bolt openings on the stool. This might be tricky to do, so be patient when doing it or have help. Next, press the toilet downwards to seat firmly in the ring. Keep in mind to inspect whether it's level.

In case it's uneven, utilize some pennies under it to level it. Thread the washers and also toilet nuts on the toilet floor screws. Tighten up the nuts a little bit one at a time while rotating from one nut to the other. Avoid over-tightening the nuts.

Utilize a hacksaw to cut off the exposed screw part above the nuts. After that cap the bolts. Next, apply tile caulk throughout the toilet base while leaving the back area open to enable water to leave. This will enable you to identify a leak.

Step 6:

You can now connect the water container. Some toilet storage tanks usually come with a preinstalled fill and flush valves.